Everything Art Space Industries supplies and installs: what each material is, where it works best, its specifications, how it is measured, and calculators to plan your quantity and budget.
Supply only, or complete supply and installation by our own trained crew. Tap any product to jump to its page.
Tap what matters most for your building. The best matches update instantly.
Specifications are typical figures for each product line. Brand, grade and exact sizes are confirmed in your written quotation.
Aluminium Composite Panel
Two thin aluminium sheets bonded to a solid core. Flat, light and available in hundreds of colours, metallics, wood and stone prints.
| Thickness | 3 mm and 4 mm |
|---|---|
| Aluminium skin | 0.21 / 0.30 / 0.50 mm |
| Sheet size | 1220 × 2440 / 3050 / 3660 mm (4 × 8, 10, 12 ft) |
| Core | Standard (PE) or Fire-Retardant (FR) for commercial buildings |
| Finishes | Solid, metallic, wood, stone, mirror, brushed |
| Fixing | Aluminium or GI frame; routed-and-folded trays or groove-and-silicone joints |
| Measured and priced by | sq ft of finished face |
| Usual wastage allowance | 10 to 15% |
Choose FR-grade ACP for commercial and multi-storey buildings. Very large panels need stiffeners to stay flat.
Wash with water and mild soap once or twice a year. Avoid abrasive pads.
High Pressure Laminate (exterior compact)
Dense, solid exterior sheets with a UV-protected face. The most realistic wood-grain and stone finishes available.
| Thickness | 6, 8 and 10 mm (exterior grade) |
|---|---|
| Sheet size | 1300 × 3050 mm and 1530 × 3660 mm (varies by brand) |
| Face | UV-cured / weather-resistant surface |
| Finishes | Wood grains, solids, stone and concrete looks |
| Fixing | Concealed or visible fixing on aluminium / GI frame with a ventilated air gap |
| Measured and priced by | sq ft of finished face |
| Usual wastage allowance | 8 to 12% |
Heavier than ACP and cut from fixed sheet sizes, so plan joints with us at design stage.
Wipe with water and a soft cloth. No polish or coating ever needed.
Wood Plastic Composite panels
Wood fibre blended with polymer. It looks and feels like timber but does not rot, crack or attract termites.
| Panel width | Typically 150 to 220 mm |
|---|---|
| Length | 2.9 to 3 m standard (cut to size) |
| Type | Standard or co-extruded / capped (better fade resistance) |
| Finishes | Teak, walnut, grey, charcoal and more |
| Fixing | Clips and screws on GI / aluminium battens |
| Measured and priced by | sq ft of finished face |
| Usual wastage allowance | 5 to 10% |
WPC expands slightly with heat, so we leave small expansion gaps. Capped WPC holds colour better in full sun.
Wash with water. Light fading in the first months is normal for uncapped WPC.
Including Solwood WPC louvers
Wood-look WPC fins fixed in rows on a frame. They give shade, privacy and a strong vertical or horizontal rhythm.
| Sections | e.g. 50 × 25, 75 × 25, 100 × 50 mm (more on request) |
|---|---|
| Length | Up to about 3 m per piece |
| Spacing | Usually 50 to 150 mm clear gap |
| Fixing | Aluminium or GI sub-frame with end caps |
| Measured and priced by | running ft (or sq ft of louvered area) |
| Usual wastage allowance | 5 to 8% |
Long spans need an intermediate support to avoid sagging.
Wash with water; check fixings once a year.
Powder-coated / wood-finish aluminium
Rectangular aluminium tubes and profiles, powder-coated or with a wood-grain finish, fixed in patterns across a facade.
| Sections | e.g. 25 × 50, 50 × 50, 50 × 100 mm and more |
|---|---|
| Wall thickness | Typically 1.0 to 2.0 mm |
| Finish | Powder coat (any RAL colour) or wood-grain sublimation |
| Fixing | Concealed brackets on aluminium / GI frame |
| Measured and priced by | running ft or sq ft |
| Usual wastage allowance | 5 to 8% |
Choose wall thickness by span; we confirm it in the drawing.
Wash with water once or twice a year.
Fluted panels and louvers
Aluminium panels and fins with a fluted (ribbed) profile that catch light and shadow beautifully.
| Profile width | Typically 150 to 300 mm per piece |
|---|---|
| Material | Extruded or roll-formed aluminium |
| Finish | Powder coat, anodised look or wood finish |
| Fixing | Interlocking or clip-on, on aluminium / GI frame |
| Measured and priced by | sq ft of finished face |
| Usual wastage allowance | 8 to 10% |
Fluted lines show every misalignment, so the frame must be perfectly level. That is part of our installation.
Wash with water; a soft brush clears dust from the grooves.
Linear baffle ceilings
Aluminium baffles (narrow vertical blades) hung in parallel rows from a carrier, for open, linear ceilings indoors and outdoors.
| Baffle size | e.g. 100 × 50 mm (other sizes available) |
|---|---|
| Thickness | 0.5 to 0.8 mm |
| Spacing | Usually 100 to 200 mm centre to centre |
| Finish | Powder coat or wood-colour coating |
| Fixing | Carrier channels on GI framing with hangers and accessories |
| Measured and priced by | sq ft of ceiling |
| Usual wastage allowance | 5 to 8% |
Closer spacing looks denser but uses more running feet of baffle. Use the baffle calculator below.
Dust or wash occasionally; individual baffles can be removed for service access.
Including VE compressed panels
Solid aluminium sheet panels (no core) folded into trays, for strong, crisp facades on large and public buildings.
| Thickness | 2 mm and 3 mm solid aluminium |
|---|---|
| Finish | PVDF or powder coat |
| Panel size | Made to drawing |
| Fixing | Tray system on aluminium / GI sub-frame |
| Measured and priced by | sq ft of finished face |
| Usual wastage allowance | 8 to 12% |
Costs more than ACP but suits high-traffic and fire-sensitive buildings.
Wash once or twice a year.
Aluminium jaali panels
Aluminium sheets cut by CNC machine into custom patterns, like a modern jaali.
| Thickness | 2 mm and 3 mm aluminium |
|---|---|
| Pattern | Our library or your own design |
| Open area | Typically 20 to 50% |
| Finish | Powder coat or PVDF |
| Fixing | Aluminium / GI frame with spacers |
| Measured and priced by | sq ft of panel |
| Usual wastage allowance | 10 to 15% |
Pattern and open area change the price; we share a mock-up before cutting.
Wash with water; check lights (if any) yearly.
Standing seam and interlocking zinc
Premium natural zinc systems: standing seam roofs and interlocking or flat-lock wall cladding, used on landmark buildings.
| Zinc thickness | 0.7 / 0.8 / 1.0 mm |
|---|---|
| Systems | Standing seam roof, interlocking panels, flat-lock cladding |
| Finishes | Natural, pre-weathered, dark grey/anthracite |
| Fixing | Clips on a ventilated deck / sub-structure with underlay |
| Measured and priced by | sq ft (or sq m) of roof / wall |
| Usual wastage allowance | 8 to 12% |
A specialist system: detailing at edges and openings matters most. We have installed over 36,000 sq ft of zinc systems.
Practically maintenance-free; keep gutters and valleys clean.
Coated aluminium roof sheets
Light, rust-free coated aluminium roofing sheets with clean profiles for sheds, terraces and extensions.
| Thickness | Typically 0.5 to 0.7 mm |
|---|---|
| Profile | Trapezoidal / standing seam |
| Finish | Coated in standard colours |
| Fixing | On MS / GI purlins with sealed fasteners |
| Measured and priced by | sq ft of roof |
| Usual wastage allowance | 5 to 8% |
Roof slope and purlin spacing are designed per site.
Clear leaves and debris; check fasteners after storms.
Gates that match your facade
Modern aluminium gates built from profiles in finishes that match your louvers and cladding.
| Profiles | Aluminium sections as per design |
|---|---|
| Finish | Powder coat or wood-grain |
| Hardware | Hinges, locks, rollers as required |
| Measured and priced by | sq ft of gate (or per gate) |
| Usual wastage allowance | — |
Very wide sliding gates need a track and motor planning at the start.
Oil hinges and rollers twice a year.
Mild steel fabrication
Custom mild steel frames, sheet work and pergolas that give shade and structure to outdoor spaces.
| Material | MS sections and sheets |
|---|---|
| Finish | Primer + PU paint or powder coat |
| Design | As per approved drawing |
| Measured and priced by | sq ft or kg |
| Usual wastage allowance | — |
Steel needs a good paint system; we use primer plus PU or powder coat.
Touch up paint every few years, especially near the coast or pools.
To complete the exterior
Glass facades, railings and board partitions so the whole exterior and interior package comes from one team.
| Glass | Toughened / laminated as required |
|---|---|
| Systems | Spider, frameless or framed |
| Partitions | Board and glass partitions |
| Measured and priced by | sq ft |
| Usual wastage allowance | — |
Glass sizes and safety glass type are confirmed after site measurement.
Clean with glass cleaner; check seals yearly.
| ACP | HPL | WPC | Aluminium louvers / profiles | Solid metal panels | Zinc Systems | |
|---|---|---|---|---|---|---|
| Look | Flat, sleek, any colour | Most realistic wood / stone | Warm timber | Rhythm, lines, shadow | Crisp, architectural | Natural zinc, ages gracefully |
| Budget | ●○○○ | ●●●○ | ●●○○ | ●●○○ | ●●●○ | ●●●● |
| Weight | Very light | Medium to heavy | Medium | Light | Light to medium | Light |
| Maintenance | Wash yearly | Almost none | Wash; capped fades less | Wash yearly | Wash yearly | Practically none |
| Fire | Choose FR grade | Fire-retardant grades exist | Combustible | Non-combustible | Non-combustible | Non-combustible |
| Best for | Homes, shops, offices | Feature walls, balconies | Villas, terraces | Elevations, sunshades | Public & commercial | Landmark roofs & walls |
| Measured by | sq ft | sq ft | sq ft | running ft or sq ft | sq ft | sq ft / sq m |
● = relative cost (more dots, higher cost). Actual prices depend on brand, thickness, design and site.
These work offline in this file. They give planning figures; we confirm everything after a free site visit.
Add each wall. Openings are subtracted; returns are added.
How many full sheets to order for an area.
Sheets = area × (1 + wastage) ÷ sheet area, rounded up.
Vertical louvers across a wall (or horizontal: swap width and height).
Pieces = width ÷ (face + gap) + 1. Running ft = pieces × height (+5% wastage).
Rows of baffles across a ceiling.
Rows = width ÷ spacing + 1 (baffles run along the length). RFT = rows × length (+ wastage).
Use the rate from your quotation, or get today's rate from our online calculator.
Typical payment: 80% advance · 15% at 50% work · 5% on completion.
Typical terms; your quotation states the exact terms, GST and validity. Site visits are free within Delhi NCR.
ACP is aluminium sheets with a core in between. It's light, flexible and comes in many colours. HPL is a dense laminate sheet with very realistic wood and stone finishes and high scratch resistance. We help you choose based on look, budget and location.
For most facades, yes. WPC looks like wood but does not rot, crack or attract termites, and it needs no polishing.
Both. You can buy material only, or get complete supply and installation by our trained team.
A 1,500 to 2,500 sq ft home facade usually takes 3 to 6 weeks after design approval. Larger and commercial projects get a written schedule with the quote.
Yes. We have completed projects in Rajasthan, Haryana and Bihar. Transport charges apply outside Delhi NCR.
Yes. Every material carries its manufacturer's warranty, which depends on the brand and product you choose. We also stand behind our installation work, and your quote states the workmanship warranty for your project.
No. It is an estimate. The final quote is given after a site visit and measurement.
Yes, site visits within Delhi NCR are free. For projects outside NCR, share photos or drawings first and we will plan the visit with you.
Yes! We provide complete exterior facades and architectural interior solutions. For interiors, we design and install WPC fluted louvers, TV unit panelling, aluminium baffle & linear ceilings, CNC decorative jaalis for pooja rooms and room dividers, interior compact laminates, and glass office partitions.
Yes. Interior WPC fluted panels and louvers are ideal for living room TV backdrops, bedroom headboard feature walls, and dining areas. They are 100% termite-proof, water-resistant, need zero polishing, and pair beautifully with warm LED strip lighting.
Aluminium and WPC baffle ceilings are parallel linear fins suspended from the ceiling. They conceal wiring and ductwork, improve room acoustics, and create a sophisticated modern aesthetic in living rooms, dining spaces, offices, reception lobbies, and retail stores.
Yes. We machine-cut custom aluminium and metal jaalis to your exact pattern and dimensions, finished in gold, champagne, matte black, bronze, or white powder-coating with backlighting provision for mandirs, foyer screens, and living-dining space dividers.
Yes. We regularly work with architects and builders and follow their drawings.
Send us your area, city and the look you like. We'll reply with options and arrange a free site visit in Delhi NCR.